Zebra Technologies PrintServer - Manual (Page 97)

86 PrintServer II User and Reference Guide
PrintServer II
Print Server II
Enabled Protocols
Modifies the protocols to be utilized.
NetWare, HP JetAdmin, or both.
Enabling HP JetAdmin Support allows
status from the Zebra device to display in
Hewlett-Packard's HP JetAdmin utility
Netware
Preferred Tree—Enter the tree that the
printer is in.
Print Server Name—Enter the name of the
printer.
Disable NetWare SAP—Enables or
disables the broadcast SAP (Service
Advertising Protocol) messages. Typically,
SAP is enabled. If SAPs are disabled, the
print server does not appear in the bindery
and is not discovered by ZebraNet View.
Disabling SAPs reduce network traffic,
however, SAPs should only be disabled on
networks using NDPS exclusively or
NetWare 5 over the IP protocol.
NetWare Frame Format—You can select
how the frames for the data packets are
assembled. The default is Automatic
Sensing.
For details, see Help.