Zebra Technologies PrintServer - Manual (Page 93)

82 PrintServer II User and Reference Guide
PrintServer II
Print Server II
Print Server II
This section covers features available for the PSII only, not the printer’s features.Some
of the features you access in this section will prompt you to enter the default user ID
and password, as follows:
• User ID: admin
• Password: 1234
The options on the Print Server page varies. ZPL and EPL printers Print Server
settings vary slightly.
Status and Configuration
The steps that follow are based on the navigation of a ZPL printer using firmware X.10
or higher.
To access the print server settings, complete these steps:
1. Open a web browser.
2. In the Address text-box, type your printer’s IP address, press Enter.
Note • The difference between ZPL and EPL is this:
• ZPL—If you have a ZPL printer, you are initially prompted to the
Printer Home page, and from there, you select Print Server Settings .
• EPL—If you have a EPL printer, you are immediately prompted to the
Print Server page.