Zebra 105SL - Manual (Page 85)

77 Configuration
Print a Configuration Label
6/30/06 105SL User Guide 11342L-001 Rev. A
Print a Configuration Label
A configuration label lists the printer settings that are stored in configuration memory. After
you load the media and ribbon (if necessary), print a configuration label as a record of your
printer’s current settings. Keep the label to use when troubleshooting printing problems.
To print a configuration label, complete these steps:
1. On the control panel, press SETUP/EXIT .
2. Press NEXT or PREVIOUS to scroll through the parameters until you reach
LIST SETUP .
3. Press PLUS (+) to confirm printing.
A configuration label prints ( Figure 22 ).
Figure 22 • Configuration Label