Zebra 105SL - Manual (Page 67)

59 Operations
Load Media in Cutter Mode
6/30/06 105SL User Guide 11342L-001 Rev. A
7.
8. Align the media with the inner media guide (
1
). Slide in the outer media guide (
2
) until it
just touches the edge of the media.
Caution • The cutter blade is sharp. Do not touch or rub the blade with your fingers.
Thread the media forward until it passes under the printhead assembly (
1
), under the
snap plate (
2
), and through the cutter assembly (
3
). (An optional cutter catch tray (
4
) is
shown in this illustration.)
1
2
3
4
1
2