Yamaha CLAVINOVA CVP-509 - Manual (Page 94)

94 CVP-509/505/503/501 Reference Manual
Connections
– Using
Y
our Instr
ument with Other De
vices –
10
Setting the Bass Note for Style Playback via MIDI Receive
The explanations here apply to the BASS Page in step 4 on page 89 . These settings let you determine the bass
note for Style playback, based on the note messages received via MIDI. The note on/off messages received at
the channel(s) set to “ON” are recognized as the bass note of the chord of Style playback. The bass note will
be detected regardless of the [ACMP ON/OFF] or split point settings. When several channels are
simultaneously set to “ON,” the bass note is detected from merged MIDI data received over the channels.
1
Use the [A]/[B] buttons to select the channel.
2
Use the [1
▲▼]–[8 ▲▼] buttons to set the desired channel to ON or OFF.
You can also set all channels to OFF by pressing the [I] (ALL OFF) button.
Setting the Chord Type for Style Playback via MIDI Receive
The explanations here apply to the CHORD DETECT Page in step 4 on page 89 . These settings let you
determine the chord type for Style playback, based on the note messages received via MIDI. The note on/off
messages received at the channel(s) set to “ON” are recognized as the notes for detecting chords in Style
playback. The chords to be detected depend on the fingering type. The chord types will be detected regardless
of the [ACMP ON/OFF] or split point settings. When several channels are simultaneously set to “ON,” the
chord type is detected from merged MIDI data received over the channels.
The operation procedure is basically the same as that of the BASS display above.
1
2