Yamaha CLAVINOVA CVP-509 - Manual (Page 13)

CVP-509/505/503/501 Reference Manual 13
V
oices – Pla
ying the K
e
yboard –
2
■ EFFECT/EQ Page
1 REVERB DEPTH/CHORUS DEPTH/DSP DEPTH/VIB ROTOR
2 DSP
3 EQ
Determines the Frequency and Gain of the Low and High EQ bands. For information about EQ, refer to
page 74 .
■ HARMONY Page
Harmony sets the Right 1 and 2 parts together. Select the Right 1 part in the Main display, before you set
it. This has the same settings as the display of “Selecting the Harmony/Echo type”
page 5 in step 3.
[1
▲▼]/
[2
▲▼]
REVERB
DEPTH Adjusts the reverb depth.
[3
▲▼]/
[4
▲▼]
CHORUS
DEPTH Adjusts the chorus depth.
[5
▲▼]
DSP ON/OFF Determines whether the DSP is on or off.
[6
▲▼]
DSP DEPTH Adjusts the DSP depth.
If you want to re-select the DSP type, you can do so in the “2 DSP”
menu explained below.
[7
▲▼]
VIBE ROTOR This will be displayed only if VIBE VIBRATE is selected for the DSP
Type parameter explained below. Determines whether VIBE
VIBRATE should be set to on or off when selecting the Voice.
[1
▲▼]–
[4
▲▼]
DSP TYPE Selects the DSP effect category and type. Select a type after selecting a
category.
[5
▲▼]–
[8
▲▼]
VARIATION Two variations are provided for each DSP type. Here, you can edit the
VARIATION on/off status and variation’s parameter value setting.
[5
▲▼] ON/OFF
The factory-programmed assignments are set to variation-off for all
Voices (standard variation of DSP is assigned). If you select VARIA-
TION ON here, a variation of the DSP effect is assigned to the Voice.
The variation parameter value can be adjusted in the VALUE menu
explained below.
PARAMETER Displays the variation parameter. (This differs depending on the effect
type and cannot be changed.)
[6
▲▼]
–[8
▲▼]
VALUE Adjusts the value of the DSP variation parameter.