Yamaha CLAVINOVA CVP-509 - Manual (Page 85)

CVP-509/505/503/501 Reference Manual 85
Connections
– Using
Y
our Instr
ument with Other De
vices –
10
LEAD GENDER
DEPTH Adjusts the degree of lead vocal gender change. This is available when the
LEAD GENDER TYPE on
page 84 is set to other than Off. The higher the
value, the more “feminine” the harmony voice becomes. The lower the value,
the more “masculine” the voice.
LEAD PITCH COR-
RECT This parameter is only effective when the LEAD GENDER TYPE on page 84
is set to other than Off. When Smooth or Hard is selected, the pitch of the lead
vocal is shifted in precise semitone steps.
UPPER GENDER
THRESHOLD Gender change will occur when the harmony pitch reaches or exceeds the spec-
ified number of semitones above the lead vocal pitch.
LOWER GENDER
THRESHOLD Gender change will occur when the harmony pitch reaches or exceeds the spec-
ified number of semitones below the lead vocal pitch.
UPPER GENDER
DEPTH Adjusts the degree of gender change applied to harmony notes higher than the
UPPER GENDER THRESHOLD. The higher the value, the more “feminine”
the harmony voice becomes. The lower the value, the more “masculine” the
voice.
LOWER GENDER
DEPTH Adjusts the degree of gender change applied to harmony notes lower than the
LOWER GENDER THRESHOLD. The higher the value, the more “feminine”
the harmony voice becomes. The lower the value, the more “masculine” the
voice.
VIBRATO DEPTH Sets the depth of vibrato applied to the harmony sound. Also affects the lead
vocal sound when the LEAD GENDER TYPE on
page 84 is set to other than
Off.
VIBRATO RATE Sets the speed of the vibrato effect. Also affects the lead vocal sound when the
LEAD GENDER TYPE on
page 84 is set to other than Off.
VIBRATO DELAY Specifies the length of the delay before the vibrato effect begins when a note is
produced. Higher values result in a longer delay.
HARMONY 1/2/3
VOLUME Sets the volume of the first (lowest), second, and third (highest) harmony note.
HARMONY 1/2/3 PAN Specifies the stereo (pan) position of the first (lowest), second, and third (high-
est) harmony note.
Random
The stereo position of the sound will change randomly whenever the keyboard
is played. This is effective when the Harmony mode (
page 81 ) is set to
“VOCODER” or “CHORDAL.”
L63>R–C–LA setting of L63>R pans the sound hard left, while C is at center, and Lat hard right.
HARMONY 1/2/3
DETUNE Detunes the first (lowest), second, and third (highest) harmony note by the
specified number of cents.
PITCH TO NOTE When this is set to “ON,” you can “play” the Voices of the instrument with
your voice. (The instrument tracks the pitch of your voice and converts it to
note data for the tone generator. Keep in mind, however, that dynamic changes
in your voice do not affect the volume of the tone generator.)
PITCH TO NOTE
PART Determines which of the instrument parts will be controlled by the lead vocal
when the PITCH TO NOTE parameter above is “ON.”