Yamaha CLAVINOVA CVP-509 - Manual (Page 75)

CVP-509/505/503/501 Reference Manual 75
Mixing Console
– Editing the
V
olume and
T
onal Balance –
8
The instrument possesses a high grade five-band digital EQ. With this function, a final effect—tone control—
can be added to the output of your instrument. You can select one of the five preset EQ settings in the EQ
display. You can even create your own custom EQ settings by adjusting the frequency bands, and save the
settings to one of two User Master EQ types.
Editing and Saving the Selected Master EQ
1
Press the [F] (EDIT) button in the EQ Page of the Mixing Console display.
The MASTER EQ EDIT display is called up.
2
Use the [A]/[B] buttons to select a preset EQ type.
The set parameters of the selected EQ type are automatically shown at the bottom of the display.
3
Use the [3
▲▼]–[7 ▲▼] buttons to boost or cut each of the five bands.
Use the [8
▲▼] buttons to boost or cut all the five bands at the same time.
4
Adjust the Q (bandwidth) and the FREQ (center frequency) of the band selected in
step 3.
To adjust the bandwidth (also called “Shape” or “Q”), use the [1
▲▼] buttons. The higher the value of Q,
the narrower the band width.
To adjust the FREQ (center frequency), use the [2
▲▼] buttons. The available FREQ range is different for
each band.
5
Press the [H] or [I] (STORE 1 or 2) button to save the edited EQ type.
Up to two types of EQ can be created and saved. The saved EQ can be recalled from the EQ tab display by
using the [A]/[B] buttons.
0
Bandwidth (also called “Shape” or “Q”) Gain
Freq
(Frequency)
5 bands → LOW
EQ1
LOWMID
EQ2
MID
EQ3
HIGHMID
EQ4
HIGH
EQ5
3
5
2
4