Yamaha CLAVINOVA CVP-509 - Manual (Page 42)

42 CVP-509/505/503/501 Reference Manual
Songs – Recording
Y
our P
erf
or
mances and Creating Songs –
4
Keyboard and Vocal Practice Using the Guide Function
The keyboard guide lamps indicate the notes (location and timing) for you to play. Also, when you sing along
with a Song playback using a connected microphone (CVP-509/505/503), the instrument automatically
adjusts the timing of the Song playback to match your vocal performance.
1
Select the desired Song for practicing the keyboard or singing.
2
Call up the setting display.
[FUNCTION]
→ [B] SONG SETTING
3
Use the [A]/[B] buttons to select the desired Guide function type.
[3
▲▼]
AUTO CH SET When set to “ON,” this automatically sets the proper MIDI channels for
the Right- and Left hand parts pre-programmed in the commercially
available Song data. Normally, this should be set to “ON.”
[5
▲▼]/
[6
▲▼]
LYRICS LAN-
GUAGE Determines the language of the displayed lyrics.
AUTO
When the language is specified in the Song data, the lyrics are displayed
accordingly. When the language is not specified in the Song data, the lyr-
ics language is regarded as INTERNATIONAL below.
INTERNATIONAL
Handles the displayed lyrics as a western language.
JAPANESE
Handles the displayed lyrics as Japanese.
[7
▲▼]
QUICK START On some commercially available Song data, certain settings related to the
Song (such as Voice selection, volume, etc.) are recorded to the first measure,
before the actual note data. When Quick Start is set to “ON,” the instrument
reads all initial non-note data of the Song at the highest possible speed, then
automatically slows down to the appropriate tempo at the first note. This
allows you to start playback as quickly as possible, with a minimum pause for
reading of data.
[8
▲▼]
P.A.T. (Perfor-
mance Assistant) See page 44 .