Zhone Technologies 800 User Manual
Page 125
Server Cards
IMACS System Release 5.1.6
5-19
IPR Card
IPR Card Configuration Screens and Settings
Table 5-6. IPR 10B2 and 10BT Frame Relay Menu Option Settings and Defaults
STATE
Activates or disables the Frame Relay port. Options are actv (active), or stdby (standby).
USER
Displays the attached user. This is a display only parameter. Options are n/a.
WAN/SERV
Point to the WAN or Server slot. Options are wan (w1-1 through w4-2), and srv (P1 through
P3).
TS
Can only be set for WAN/SRV case.
RATE
Always 64k.
PORT TYPE
Frame Relay port type. Choices are u-dte, u-dce, nni, frad, none.
Parameter
User Options
Default
STATE
actv stdby
stdby
USER
n/a
n/a
WAN/SRV
wan (w1-1 through w4-2) serv (P1 through P3)
w1-1
TS
1-24
1-24
RATE
64k
64k
PORT TYPE
u-dte u-dce nni none frad
none
LMI
ansi ccitt lmi none
none
DCE PARAM
DCE T392 N392 N393 LMI
DTE PARAM
DTE T391 N391 N392 N393
ASYNC LMI
no yes
no
LOOPBACK
off line local
off