ZyXEL Communications ZyXEL Dimension ES-2048 - Manual (Page 74)

Chapter 7 Basic Setting
ES-2048 User’s Guide
74
"
You must configure a VLAN first.
Figure 27 Basic Setting > IP Setup
The following table describes the labels in this screen.
Table 11 Basic Setting > IP Setup
LABEL DESCRIPTION
Domain Name
Server
DNS (Domain Name System) is for mapping a domain name to its
corresponding IP address and vice versa. Enter a domain name server IP
address in order to be able to use a domain name instead of an IP address.
Default
Management
Specify which traffic flow (In-Band or Out-of-band) the Switch is to send
packets originating from itself (such as SNMP traps) or packets with unknown
source.
Select Out-of-band to have the Switch send the packets to the out-of-band
management port. This means that device(s) connected to the other port(s) do
not receive these packets.
Select In-Band to have the Switch send the packets to all ports except the out-
of-band management port to which connected device(s) do not receive these
packets.
In-Band Management IP Address