Zoom ZoomAir IG-4150 - Manual (Page 54)

54 ZoomAir IG-4150 Installation Guide & Reference Manual
! CAUTION: Pressing the Reload button changes the IG
settings. To prevent irreversible changes, you must
disable Encryption on your Wireless Client to access your
IG in this forced Reload mode
.
Follow this procedure to disable Encryption:
1
Use a small screwdriver to press the Reload button on your
IG. The top LED on the IG changes from green to orange.
This is the only LED that is lit in this mode.
2
Access the IG remotely through your Wireless Client by
clicking the ZoomAir Client Manager icon on the taskbar in
the lower right-hand corner of your desktop. The icon will be
grayed out because you have pressed the Reload button on
your IG.
3
From the Actions menu, select Add/Edit Configuration
Profile, click the Edit Profile button, and clear the Enable
Data Security checkbox. Click OK.
The Client Manager icon turns green again as a radio
connection is established between your IG and your Wireless
Client. You can now use the IG, bypassing the password and
the WEP Encryption Key. To avoid risk of intrusion, do not
leave your network without a WEP Encryption Key for long.