Zebra Technologies Zebra P120i - Manual (Page 55)

980504-001 Rev. A P120i Card Printer User Guide 45
4
P120i Printer Operation
Printing
Printing with the P120
i Printer requires the Windows Printer Driver, your card design/issuing
software or printer command level programming through the printer interface.
The P120
i Card Printer can be used with any Windows 2000, or Windows XP software
application program, using the drivers provided on CD with the printer. Reference Chapter 2
for instructions on installing the P120
i printer driver.
Creating a Sample Card
Before you begin a new printing session, print a sample card to ensure that the cards will be
printed correctly. Follow the steps below to print your first card using the True Colours
TM Card
Printer Ribbon Cartridge and the Windows printer driver.
1. Go to the Microsoft Word Software.
2. If the P120i printer was not selected as the default printer, go to File> Select Printer and choose
Zebra P120i Card Printer from the printer names list. Close the Print dialog box.
3. Go to File>Page Setup.
4. Select the Size tab, and under Paper Size, choose Card. Under orientation, select Landscape or Por-
trait.
5. Select the Margins tab, and set the Top, Bottom, Left and Right margins to O (zero).
6. Press OK to close Page Setup window.
7. The card appears on the window.
8. Design a card with both black and colored text and with colored pictures similar to the sample card
shown below.