Zebra Technologies XiIII Series User Manual

Page 85

Zebra XiIII-Series User’s Guide

:DUQLQJ +HDG &ROG

:DUQLQJ &XWWHU -DPPHG

2XW RI 0HPRU\

Problem

Solution

The printhead is under temperature.

Continue printing while the printhead reaches the correct
operating temperature. If the error remains, the
environment may be too cold for proper printing. Relocate
the printer to a warmer area.

Problem

Solution

Cutter blade is in the media path.

Turn off the printer power and unplug the printer. Inspect
the cutter module for debris and clean as needed following
the cleaning instructions on page 71.

Problem

Solution

*There is not enough memory to perform the
function shown on the second line of the error
message.

Insufficient memory for the label length, downloaded fonts/
graphics, and images.

Ensure that the device, such as FLASH memory or
PCMCIA card, is installed and not write protected or full.

Ensure that the data is not directed to a device that is not
installed or available.