Yamaha 1009MWTO-F0 User Manual
Page 44
P
anel Oper
ation and Displa
y
s
Utility Displays
DME64N/DME24N Owner’s Manual
44
Slot
Displays info about an I/O card installed in a DME64N/24N I/O slot.
Card name
Displays the name of the installed card.
(no title)
Resets the installed card.
Format
Displays the audio format – 88.2 or 96 kHz.
GPI
GPI connector calibration and status display.
Reset
Resets the GPI calibration.
Max
Sets the maximum calibration value.
Min
Sets the minimum calibration value.
(no title)
Current calibration status.
HA
Current status and setup for the internal and connected external head amplifiers.
HA
Current status and setup for head amplifier type.
WCLK
Current status and setup for the word clock used by the head amplifier(s).
(no title)
Displays the audio format 88.2/96 kHz.
Gain
Current status and setup for individual head amplifier channel gain.
+48V
Current status and setup for individual head amplifier channel phantom power supply (+48V
ON/OFF).
(no title)
Displays current status of the master phantom power switch.
HPF
Current status and setup for individual head amplifier channel high-pass filter on/off.
Frq
Current status and setup for individual head amplifier channel high-pass filter frequency.
CASCAD
(DME64N
only)
Displays current status for the [CASCADE] connectors.
Head Margin
Displays current status for the head margin of the audio signal handled via the [CASCADE]
connectors.
Unit No.
Displays how many devices the unit is from the beginning of the cascade chain.
Mixer I/O
Displays current status for the channels to be used for audio signals cascaded to a mixer.
Check
Mode
Current status and setup for the thru connection.
Page
Item
Description
Manual Page