Utility displays, Items accessible via the utility display – Yamaha 1009MWTO-F0 User Manual
Page 43
P
anel Oper
ation and Displa
y
s
Utility Displays
DME64N/DME24N Owner’s Manual
43
Utility Displays
Most basic DME64N/24N functions can be accessed via the Utility Display.
Items accessible via the Utility display
Page
Item
Description
Manual Page
Info
Current status and settings for the devices basic parameters.
Label
Name display.
Version
The device’s current version number.
Date
Current status and setup for the internal calendar/clock.
Battery
Shows the status of the internal battery.
Net
Current status and settings for the Ethernet network.
MASTER/SLAVE
Displays current status and determines whether the device is device group master or not.
IP Adr.
Current status and setup for the device’s IP address.
Master ID
Displays and sets the device group master host address.
Link Mode
Current status and setup for the [NETWORK] connector.
MAC Adr.
Displays the device’s MAC address.
Disp
Current status and setup for the display mode, etc.
LCD Contrast
Current status and setup for display panel contrast.
LCD Backlight
Current status and setup for the display panel backlight.
Meter Fall Time
Current status and setup for meter fall time.
Lock
Current status and setup for panel lock and related functions.
Utility
Current status and setup for the Utility display settings.
Panel Lock Boot
Current status and setup for the DME64N/24N’s power-on panel lock status.
Panel Lock Target
Current status and setup for the panel lock target.
User Defined Lock
Panel lock and setup for each page of User Defined Button.
Misc
Current status and setup for settings not included in other pages.
Scene Store
Current status and setup for scene store accessibility.
Last Mem. Resume Indicates and determines whether the previous memory contents will be retained when the
unit is restarted.
Event Scheduler
Current status and setup whether an event schedule setup in the DME Designer will be
executed or not.
Remote
Rmt Ctrl
Displays/sets the connector and connection type to be used for DME remote control
protocol communication.
Int HA Ctrl
Displays/sets the connector to be used for internal head amp control.
Ext HA Ctrl
Displays/sets the type of connection to be used for external head amp control.
COM
Displays/sets the type of connection to be used for DME protocol communication.
MIDI
Current status and setup for MIDI functions.
Port
Current status and setup of the MIDI port.
Protocol
Displays/sets the protocol to be used for communication with devices connected via MIDI.
CH
Current status and setup for the MIDI transmit and receive channels.
Program Change
Current status and setup for program change transmission/reception, omni on, and echo
on/off.
Control Change
Current status and setup for control change transmission/reception, omni on, and echo
on/off.
Param Change
Current status and setup for parameter change transmission/reception, omni on, and echo
on/off.
WCLK
Current status and selection of the DME64N/24N word clock.
Fs
Displays the word clock frequency.
Int
Current status of the internal word clock.
WCIN
Current status of the word clock received at the [WORD CLOCK IN] connector.
Cascade
Current status of the word clock received via the [CASCADE IN] and [CASCADE OUT]
connectors.
SLOT1-4
Current status of the word clock received via cards plugged in to the I/O card slots.