Yamaha AW1600 - Manual (Page 50)

AW1600 Owner’s Manual
Using the input library
5
Tr
ac
k recording
50
The input library is a library of settings used to apply internal effects, EQ, or dynamics settings to
the input signal when you want to record the processed signal. Here’s how to apply input library
settings to the signal of an input channel.
1
Press and hold the [INPUT SEL] key of the
input channel for which you want to use the
input library, to access the INPUT SETTING
popup window.
2
Move the cursor to the LIBRARY button,
and press the [ENTER] key.
The following popup window will appear.
In this popup window, you can select whether the
internal effect 1 or 2 will be patched to the input chan-
nel.
3
Move the cursor to the EFF1 button or EFF2
button, and press the [ENTER] key.
The INPUT LIBRARY popup window will appear,
allowing you to select an input library.
1 List
This is the library list. The line surrounded by a dotted
line in the middle of the list is the data that is selected
for loading. When you turn the [DATA/JOG] dial, the
data in the list will scroll upward or downward.
B RECALL button
Move the cursor to this button and press the [ENTER]
key to load the currently selected data.
C EXIT button
Move the cursor to this button and press the [ENTER]
key to close the popup window.
4
Turn the [DATA/JOG] dial to select the
desired input library data.
The input library data is organized into the following
categories.
5
Select the desired data, and press the
[ENTER] key.
A popup window will ask you to confirm the recall
operation.
6
Move the cursor to the OK button and press
the [ENTER] key.
The data of the selected library will be loaded, and the
internal effect, EQ (or speaker simulator), and dynam-
ics effect will be applied to the input signal.
Using the input library
• When you use the input library, internal effect 1 or 2 will be
disconnected from the send/return of the mixer, and patched
to a specific input channel. For this reason, you can use the
internal effects on a maximum of two channels.
NOTE
2
3
1
Number Abbreviation Category
00 Data for initializing the input channel.
01–25 EG Data suitable for electric guitar.
26–30 AG Data suitable for acoustic guitar.
31–35 BA Data suitable for bass.
36–40 VO Data suitable for vocals.
• All input library data is read-only.
NOTE