Yamaha DVX-S200 - Manual (Page 67)

63
Creating the Best Listening Space
Creating the Best Listening Space
English
Setting the Speaker Size
TV
CH
CINEMA
CH
POWER POWER
AUDIO
/DTS SELECT
NIGHT SW
TV CH
TV INPUT
SLEEP
PRESET PRESET
A B C D E
CENTER SURR
SHIFT
STEREO MATRIX 6.1
A-B REPEAT
ANGLE SUBTITLE
DVR-S200 WB56620
ON SCREEN MENU
TEST
RETURN STATUS
TV VOL VOLUME
MUTE
AMP
DVD/CD VCR VIDEO 1
VIDEO 2 TUNER MD/CD-R
MOVIE MUSIC SPORTS GAME
SET MENU
ENTER
g
AMP
h
g g
SET MENU
• Even if “* FRONT” is set to “SML”, when “* BASS” is set to “FRONT”, low tones below 90 Hz of the Front L/R channel
signal will output from the Front Speakers.
• If you select a sound field effect when “* SUR.” is set to “NON”, CinemaStation enters Virtual Cinema DSP mode.
• Settings made in Speaker mode are not reflected when connected to headphones.
To get the most out of the sound field effects, you need to use all 6 of the
supplied speakers (Front, Center, Surround and Subwoofer). But depending
on your listening objectives, you can turn off specified speakers.
When using any speaker other than YAMAHA Speaker Set NX-P200, you
need to specify the speaker size.
You can specify these settings in Speaker mode.
Setting the Speaker Mode
Specify the speaker to produce no sound by setting
“* CENTER”, “* SUR.” or “* BASS”.
When using other speakers, be sure to set the speaker
size, and depending on your listening objectives set the
Front Speaker level.
Press AMP.
Press SET MENU.
“* Speaker Set” appears.
Press w.
Press h or g to select item you want to set.
Press q or w to change the setting.
Repeat steps 4 and 5 to set the needed item.
When exiting the SET MENU, press SET MENU.
Pressing any one of the DSP Program buttons also exits
the SET MENU.
Note
Advice
• When a sampling digital signal over 48 kHz is input, some settings may not be reflected in the playback sound.
012DVX-S200-en 04.3.1, 11:18 AM 63