Yamaha DVX-S200 - Manual (Page 53)

49
Using Other Equipment
Using Other Equipment
English
Dubbing from a Video Camera to a VCR
For video camera and VCR operations, be sure to read
their respective owner’s manuals.
TV
POWER POWER
AUDIO
/DTS SELECT
NIGHT SW CENTER SURR
SHIFT
STEREO MATRIX 6.1
A-B REPEAT
ANGLE SUBTITLE
DVR-S200 WB56620
CINEMA
AMP
DVD/CD VCR VIDEO 1
VIDEO 2 TUNER MD/CD-R
MOVIE MUSIC SPORTS GAME
POWER
VIDEO 1
VIDEO 2
Turn on the TV.
Start playback on the video camera, then start
recording with the VCR.
Prepare to record with the VCR.
For example, switch the VCR input to external.
Press VIDEO 1 or VIDEO 2 according to the jacks
connected to the video camera.
CinemaStation can now input video signal (video
camera).
Press POWER to turn on CinemaStation.
Switch the TV input.
For example, switch to video 1 if CinemaStation is
connected to video input 1 on the television.
Turn on the video camera and VCR.
CinemaStation
VCR
TV
Note
• If you play a video source that uses scrambled or encoded signals to prevent it from being dubbed, the picture itself may be
disturbed due to those signals.
Connecting with SCART cable (U.K. and Europe models only)
Do not connect CinemaStation to a monitor via a VCR. The copyright protection
technology incorporated in CinemaStation may not allow the video to play.
Note
• Press VIDEO for U.K. and Europe models.
011DVX-S200-en 04.3.1, 11:17 AM 49