Zanussi ZM266STG - Manual (Page 21)

19
OTHER CONVENIENT FUNCTIONS
TO SET THE SAFETY LOCK FUNCTION
1. Press and hold the STOP key for 3 seconds.
NOTE: When the Safety Lock is set you cannot input any buttons except the STOP button.
TO CANCEL THE SAFETY LOCK FUNCTION
1. Press and hold the STOP key for 3 seconds.
The display will show: The display will show the
time of day, if set.
4. SAFETY LOCK FUNCTION
x1 for 3 seconds x1 for 3 seconds
2. ADD 30 SECONDS FUNCTION
The START/+30 button allows you to operate the two following functions:
a. Direct start
You can directly start cooking on 900 W microwave power level for 30 seconds by pressing the
START/+30 button.
NOTE:
To avoid the misuse by children the START/+30 button can be used only within 3 minutes after the
preceding operation, i.e., closing the door, pressing the STOP button or cooking completion.
b. Extend the cooking time
You can extend the cooking time for multiples of 30 seconds if the button is pressed while the oven is in
operation.
3. TO CHECK THE POWER LEVEL
To check the microwave power level during cooking press the COOKING MODE button.
As long as your finger is touching the COOKING MODE button the power level will be displayed.
The oven continues to count down although the display shows the power level.
x1
2. ZD-72D English 01/06/2004 09:32 Page 19