Pcl/pjl implementation – Xerox CUSTOMER TIPS 7425/7428/7435 User Manual
Page 3
PCL/PJL Implementation
The following table contains the PCL feature commands and shows the syntax required to use the feature.
After the table are examples of how to use these commands and examples of a PCL file.
Feature
Implementation
Values
Job Name
@PJL SET JOBNAME =
"jobname-string"
Where jobname-string is a maximum of 32
characters
Custom
Paper Size –
available only
for PCL
You have to specify by PCL:
Width of Custom Paper is specified by
where # equals decipoints (89 mm – 320.0
mm).
Length of Custom Paper is specified by
where # equals decipoints (98 mm – 483
mm).
For instance:
4.25-inch x 5.5-inch will give
4.25-inch x 720 decipoints/inch = 3060
and
5.5-inch x 720 decipoints/inch = 3960
Media Size
@PJL SET PAPER = value Where
value is one of the following:
A3: A3 (297 x 420mm)
A4: A4 (210 x 297mm)
A5: A5 (148 x 210mm) *
JISB4: B4 (257 x 364mm)
JISB5: B5 (182 x 257mm)
STATEMENT: Statement (5.5 x 8.5”) *
EXECUTIVE: Executive (7.25 x 10.5”) *
LETTER: Letter (8.5 x 11”)
JISEXEC: 8.5 x 13”
LEGAL: Legal (8.5 x 14”)
LEDGER: Tabloid (11 x 17”)
ROC16K = 16K (194 x 267mm) *
ROC8K = 8K (267 x 388mm) *
16KAIGCO = 16K (195 x 270mm) *
8KAIGCO = 8K (270 x 390mm) *
* Whether each paper is available depends on
NV memory setting.
The following paper sizes are only available with
bi-pass tray.
A6: A6 (105 x 148mm)
JISB6: B6 (128 x 182mm)
8X10 = 8 x 10"
SPANISH = 215 x 315mm
11X15 = 11 x 15"
A4COVER = A4 Cover (223 x 297mm)
LETTERCOVER = 9 x 11"
12X18 = Oversized Tabloid (12 x 18")
SA3 = SRA3 (320 x 450mm)
dc09cc0453
Customer Support
Page 3