Xerox CUSTOMER TIPS 7425/7428/7435 - Manual (Page 23)

dc09cc0453
Customer Support
Page 23
Feature Implementation Values
Brightness < <<
/Type 26
/Brightness int >>
>> setpagedevice
Where int is one of the following:
5 = Bright (+5)
4 = Bright (+4)
3 = Bright (+3)
2 = Bright (+2)
0 = Normal*
-1 = Dark (-1)
-2 = Dark (-2)
-3 = Dark (-3)
-4 = Dark (-4)
-5 = Dark (-5)
Separations < value >>
setpagedevice
Where value is one of the following:
true = Multiple color separations will be
generated for each page of output
false = All colorants will be combined into a
single composite page on a single
sheet of physical medium*
Separation
Color Names <value>>
setpagedevice
Where value is an array.
Legal element values are the process
colorant names implied by the process
color model.
Valid colorant names for each process
color model are like the following in case of
separation
DeviceCMYK = Cyan, Magenta, Yellow,
Black
DeviceCMY = Cyan, Magenta, Yellow
DeviceRGB = Red, Green, Blue
DeviceRGBK = Red, Green, Blue, Gray
DeviceGray = Gray
Separation
Order <value>>
setpagedevice
Where value is an array.
Legal element values are the process
colorant names implied by the process color
model.
Use CIE Color <value>>
setpagedevice
Where value is one of the following:
true = Re-map each color from device
color space to device
independent’s CIE- based color
space
false = Do not re-map color*