Yamaha 01X - Manual (Page 81)

01X Owner’s Manual
Recording/Playback/Remote Control
81
Before Using
Basics Section
Appendix
Getting Started
Reference
2) Adjust the send levels
q Select the desired audio channel.
Use the [SEL] buttons (and the BANK [] (Left/
Right) buttons, if necessary). Note that the display
windows in Cubase SX change as well — letting you
directly select the Channel Settings window for any
track.
• Only audio channels can be controlled from the 01X. MIDI chan-
nels (and MIDI effects) can be called up, but effect control is not
implemented. However, keep in mind that you CAN control EQ
and effects of the plug-in instruments (see below).
Controlling effects for plug-in instruments
• Even though the plug-in instruments (plug-in synthesizers, drum
machines, samplers, etc.) are technically MIDI instruments, their
audio signals are fair game for processing with the EQ and
effects. To control these from the 01X, use the BANK [</>]
(Left/Right) buttons (if necessary) and the [SEL] buttons to select
the appropriate plug-in audio channel. (Make sure NOT to select
the normal MIDI track channel here.)
w Call up the Send parameters by pressing the [SEND]
button.
e From Page 1, use the knobs to adjust the effect send
level for each effect (1 - 8).
r If necessary, turn the desired effect on or off.
Call up Page 2 of the Send parameters with the DIS-
PLAY [ / ] (Up/Down) buttons, then use the corre-
sponding knob to turn the effect (1 - 8) for the channel
on or off.
Select other pages in the Send parameters with the
DISPLAY [ / ] (Up/Down) buttons and make the
appropriate settings as needed:
Page 3: Pre/Post
Page 4: FX bus
3) Change the effect settings
q Press the [EFFECT] button.
Each press of the [EFFECT] button toggles between
MFX (Master) and FX (Send).
w Use the channel 1 knob to select the desired effect, 1 -
8.
The effect name is shown at the top of the LCD. If the
effect slot has no effect, “Off No Effect” is shown.
e Use the DISPLAY [ / ] (Up/Down) buttons to select
the effect parameter pages.
Some effects have few pages (3 or 4), others have
many. (Some effects, such as Steinberg Step Filter, fea-
ture several dozen parameter pages.)
r Use the knobs to adjust the parameters.
• You can also select plug-in instrument channels for audio pro-
cessing (EQ, and effects). (See the Hint above, “Controlling
effects for plug-in instruments.”)
• For ease in editing, you may want to call up the particular effect
edit window so that you can see the parameters in Cubase SX as
you tweak them. For the Send Effects, click the appropriate “e”
button in the right column of effects in the Channel Settings win-
dow. For the Master Effects, press F6, then click the appropriate
“e” button.
Level1 Level2 Level3 Level4 Level5 Level6 Level7 Level8
FX Send Full Kit Page:01/04
FXOn1 FXOn2 FXOn3 FXOn4 FXOn5 FXOn6 FXOn7 FXOn8
FX Send Full Kit Page:02/04
FX#1 On Karlette
Send FX1 Page:01/07