Yamaha 01X - Manual (Page 103)

01X Owner’s Manual
Function Tree/Function List
103
Before Using
Basics Section
Appendix
Getting Started
Reference
1 – 7 EFFECT1/2 PARAMETER (Effect 2 is 48kHz/44.1kHz mode only)
z – v (Effect Parameters)
Determines the effect parameters. Parameters depend on the Effect Types
selected in the Library (see the Effect Library List).
No 126
EFFECT1/2 LIBRARY
q – r
01 – 128
(Library number) Determines the Library number. Preset Effect numbers (01 – 43; see page
125) are indicated by asterisks (*) in the display and cannot be changed.
No 125
z – v (Title Edit) Determines the title (name) of the Effect Library. No 41
b RECALL
For calling up the selected Effect Library. The confirmation prompt can be
turned on/off as desired. (See “Recall Confirmation” on page 95.)
Yes 54
n STORE
Effect settings are stored to internal memory in the Effect Library. Up to 85
settings (common to Library 1 and 2) can be stored. The confirmation prompt
can be turned on/off as desired. (See “Store Confirmation” on page 95.)
• Any and all data in the Store destination will be lost when executing the
Store operation. Make sure to save and archive important data to com-
puter using the Studio Manager program (page 9).
Yes 65
m CLEAR This deletes the selected Effect Library. Yes
CHANNEL LIBRARY [SHIFT] + [SELECTED CHANNEL]
q – r
00 – 128
(Library number)
Determines the Library number. Preset Channel numbers are indicated by
asterisks (*) in the display and cannot be changed.
The following presets are available.
• 00 Reset (- ∞ dB): This preset memory resets all parameters of the cur-
rently-selected channel to their initial values and sets
the channel fader level to -
∞ dB.
• 01 Reset (0dB): This preset memory resets all parameters of the cur-
rently-selected channel to their initial values and sets
the channel fader level to 0dB (i.e., nominal).
No 36
z – v (Title Edit)
Determines the title (name) of the Effect Library. The category (IN/BUS/
AUX/ST) is shown following the name, for all Library Scenes, excepting pre-
sets.
No 41
n RECALL
For calling up the selected Library. The Libraries that can be recalled from the
channel Library are limited to ones whose category is the same as the cur-
rently selected channel. For example, you can recall Input Channel settings to
Input Channels, but not to Aux Out 1 through 4, with the exception that mem-
ories #0 and #1 can be recalled to any channels.
Yes 54
m STORE
Channel settings are stored to internal memory in the Channel Library. Up to
127 settings can be stored. The confirmation prompt can be turned on/off as
desired. (See “Store Confirmation” on page 95.)
• Any and all data in the Store destination will be lost when executing the
Store operation. Make sure to save and archive important data to com-
puter using the Studio Manager program (page 9).
Yes 65
, CLEAR This deletes the selected Channel Library. Yes
Knob
Function name/
settings
Explanation Prompt
Related
pages
Block
diagram
[PAGE SHIFT] + DISPLAY [ / ]
[PAGE SHIFT] + DISPLAY [ / ]