Yamaha CBX-K2 - Manual (Page 38)

38
Error Messages
The following messages may appear in the LED display during operation, indicating problems or incorrect operation.
Batteries are low
The battery power is too low for operation. Replace all batteries with a
complete set of six new batteries of the same type.
E1
MIDI buffer full
Too much MIDI data has been received. Eliminate unnecessary MIDI data.
Active Sensing error
This error occurs when a MIDI cable is connected to the MIDI IN terminal
of the CBX-K2 and Active Sensing messages <> have not been
received for a certain amount of time or the MIDI cable has been acci-
dently disconnected.
SysEx data error
The received System Exclusive message is incorrect. Confirm the contents
of the transmitted data (such as necessary MSB, LSB, etc.) and attempt the
operation again.
MIDI framing error
An error occurred during the reception of MIDI data.
E2
E3
E4
E5
NOTE — About messages E2 – E5
■
Error messages E2 – E5 occur during the reception of MIDI data when Merge is
turned on. Exit from the error message by pressing C or any other panel
button.
■ When any of these error messages occurs, Merge is automatically turned off, and
the following messages are transmitted over all MIDI channels 1 – 16: Hold 1
(damper) OFF, All Note OFF, and All Sound OFF.