Zebra Technologies Zebra P210i - Manual (Page 28)

28
Card
Printer
Solutions
General information
Getting started
Operation
Cleaning
Specifications
Appendix A
Appendix B
Troubleshooting
Printing a card
P205 & P210i Plastic Card Printer
3 • Lift the cartridge lid up and remove the Adhesive Cleaning Roller from the cartridge and discard.
4 • Carefully peel off wrapper from new Cleaning Roller.
5 • Install new Cleaning Roller into the Cartridge * . To avoid contamination, always hold the Cleaning Roller assem-
bly by the ends.
6 • Replace Cleaning Cartridge into printer following the rail guides. Ensure the assembly locks in place.
D O N OT touch the roller surface that contacts the cards.
7 • Re-insert the Ribbon Cartridge
8 • Close Cover by pushing firmly down on both sides.
¨ See Appendix C for replacement Cleaning Rollers.