Zebra Technologies Zebra P210i - Manual (Page 14)

14
Card
Printer
Solutions
General information
Getting started
Operation
Cleaning
Specifications
Appendix A
Appendix B
Troubleshooting
Printing a card
P205 & P210i Plastic Card Printer
2 • 2 Loading Ribbon Cartridge
The P210i Printer requires approved ribbon cartridges (see Appendix C). The Resin Thermal Transfer and Dye
Sublimation ribbons are specifically designed for your P210i Printer.
i Series Printers require the use of i Series ribbons for full color printing.
You can print up to 100 cards in YMCKO with the ribbon cartridge.
When ribbon is completely used change the whole cartridge assembly.
DO NOT TOUCH the print head or the electronic components on the print head
carriage. Discharges of electrostatic charge from the human body or other surfaces
can damage the print head or other electronic components used in this device.
1 • Open printer cover by pressing both Cover Release buttons on the sides of your printer.
2 • Insert vertically the ribbon cartridge into the slot and press gently until you can feel it engage properly.
Please note that the ribbon automatically synchronizes.