1 wps: pbc (push button configuration), Figure 43 wps: pbc (push button configuration) – ZyXEL Communications NWD210N User Manual

Page 62

Chapter 4 Wireless Configuration

NWD210N User’s Guide

4.5.1 WPS: PBC (Push Button Configuration)

This screen allows you to use the WPS Push Button Configuration mode. See

for more information. Select WPS and PBC (Push Button Configuration) in the

Adapter screen. The following screen displays.

Figure 43 WPS: PBC (Push Button Configuration)

Press Start when you want to begin the WPS process. You must also press the button on the
other device within two minutes.

Power Saving

Mode

Select Fast Power Save to save power. This forces the NWD210N to go to sleep

mode when it is not transmitting data.
When you select Continuous Access Mode, the NWD210N will never go to

sleep mode.
At the time of writing, this field is not available in Windows Vista.

WMM QoS

Select this to enable Wi-fi MultiMedia Quality of Service on the NWD210N.
At the time of writing, this field is not available in Windows Vista.

WPS (WiFi

Protected Setup)

Select this to enable Wi-fi Protected Setup on the NWD210N.

PBC (Push Button

Configuration)

Select this to use the PBC (Push-Button Configuration) WPS mode. When you

use the PBC mode you do not use a PIN.
When you select this, the PBC (Push Button Configuration screen appears (see

PIN - Use This

Device’s PIN

Select this to use the PIN (Personal Identification Number) WPS mode. Use this

option when you want to enter the NWD210N’s PIN in another WPS-enabled

device.
When you select this, the PIN - Use this Device’s PIN screen appears (see

PIN - Use the PIN

From the AP or

Wireless Router

Select this to use the PIN (Personal Identification Number) WPS mode. Use this

option when you want to enter the PIN from another WPS-enabled device in the

NWD210N.
When you select this, the PIN - Use the PIN From the AP or Wireless Router

screen appears (see

Save

Click Save to save the changes to the NWD210N and return to the Link Info

screen.

Table 17 Adapter (continued)

LABEL

DESCRIPTION