ZyXEL Communications NWD210N - Manual (Page 22)

Chapter 1 Getting Started
NWD210N User’s Guide
22
The following table describes the operation of the NWD210N’s LEDs.
1.2 Application Overview
This section describes some network applications for the NWD210N. You can either set the
network type to Infrastructure and connect to an AP or use Ad-Hoc mode and connect to a
peer computer (another wireless device in Ad-Hoc mode).
1.2.1 Infrastructure
To connect to a network via an access point (AP), set the NWD210N network type to
Infrastructure (see
Chapter 4 on page 56 ). Through the AP, you can access the Internet or the
wired network behind the AP.
B USB connector
C USB connector cap.
Table 2 NWD210N LEDs
LED COLOR STATUS DESCRIPTION
Blue On The NWD210N is turned on, connected to an AP, and is not
transmitting or receiving data.
Blinking
regularly and
rapidly
The NWD210N is turned on, but is not connected to a wireless
network.
Blinking
regularly and
slowly
The NWD210N is turned on, connected to a wireless network,
and is not transmitting or receiving data.
Blinking
Irregularly
The NWD210N is turned on, connected to a wireless network and
is transmitting or receiving data.
Off The NWD210N is turned off.
Table 1 NWD210N External View
LABEL DESCRIPTION