Yamaha pmn - Manual (Page 99)

E-
93
AD
V
ANCED
OPERA
TION
English
ZONE 2
Remote control in ZONE 2
In the second (Zone 2) room, the supplied remote control can be used as the Zone 2 remote control. You can select the input source and
control the component which is located in the main room directly from the second room regardless of the listening condition in the main
room.
1 1 Go to the RECEIVER control panel and tap or
repeatedly to open the ZONE2 control panel.
2 2 Use the input selector buttons (such as ) to select
the input source you want to listen to.
3 3 Tap ( or repeatedly) to open the
OPTION control panel.
On the OPTION control panel, you can:
• Adjust the volume of ZONE 2 OUT independently by using
.
• Mute the sound of ZONE 2 OUT by using .
• Select the input source by using .
Note
• can be used to adjust the volume only when
you set the SET MENU item “17 ZONE2 SET”, “ZONE2
OUT” to “VAR.” (see page __).
4 4 Switch to the component control panel via the Device
menu.
You can control the component by using the buttons on the
component control panels.
1
3
2
3