Yamaha pmn - Manual (Page 64)

E-
58
SET MENU ITEMS
The SET MENU consists of eighteen items including the Speaker Set, Center Graphic Equalizer and Parameter Initialization features.
Choose the appropriate item and adjust or select the values as necessary.
Notes
• You can adjust the items in the SET MENU while reproducing a source.
• We recommend that you adjust the items in the SET MENU while using a video monitor. It is easier to see the video monitor screen than it
is to see the front panel display on this unit while adjusting SET MENU items.
1 SPEAKER SET 1A CENTER SP
1B MAIN SP
1C REAR L/R SP
1D REAR CT SP
1E LFE/BASS OUT
1F FRONT EFCT SP
1G MAIN LEVEL
2 LOW FREQ. TEST
3 HP TONE CTRL
4 CENTER GEQ
5 REAR CT GEQ
6 CINEMA EQ
7 INPUT RENAME
8 I/O ASSIGNMENT
9 INPUT MODE
10 PARAMETER INI
11 LFE LEVEL
12 DYNAMIC RANGE
13 SP DELAY
14 AUDIO DELAY
15 DISPLAY SET
16 MEMORY GUARD
17 ZONE2 SET
18 6CH INPUT SET
Selects the output mode suitable for your center speaker.
Selects the output mode suitable for your main speakers.
Selects the output mode suitable for your rear speakers.
Selects the output mode suitable for your rear center speaker.
Selects the speakers for your LFE/BASS signal output.
Selects the output mode for your front effect speakers.
Selects the output level for your main channels.
Matches the subwoofer level with the level of the other speakers.
Adjusts the tonal balance of the headphones.
Matches the center speaker tonal quality with the main speakers.
Matches the rear center speaker tonal quality with the rear speakers.
Adjusts the tonal balance of the main and center speakers, front effect speakers, rear speakers and rear center speaker
separately.
Changes the name of the inputs.
Assigns the I/O terminals to the designated input sources.
Selects the initial input mode of the sources.
Initializes the parameters of a group of DSP programs.
Adjusts the output level of the LFE channel for Dolby Digital or DTS signals.
Adjusts the dynamic range for Dolby Digital signals.
Adjusts the delay time for center and rear center speakers.
Adjusts the delay time for all channels.
Sets the background or position of on screen displays and changes the brightness of this unit’s front panel display.
Locks DSP program parameters and other SET MENU settings.
Selects the mode of Zone 2.
Sets the destination of the center channel and subwoofer channel signals that are input into the 6CH INPUT jacks.