Yamaha pmn - Manual (Page 90)

E-
84
REMOTE CONTROL FEATURES
Restoring
When you delete elements, they are no longer visible in the Use mode but remain in the remote control’s memory. This allows you to restore
them.
• You can restore a deleted button or a device action in the Learn mode.
• You can restore a deleted component, macro group or timer group in the Add mode.
Actions associated with direct-access or left/right buttons cannot be restored. You must reprogram them as explained in “Learning direct-
access and left/right buttons” on page __.
■ Restoring buttons and button actions
1 1 Switch to the Learn mode via at the bottom of
the touch screen.
The empty buttons become visible.
2 2 Complete steps 3 to 7 in “Learning control panel
buttons” on page __.
The button is restored.
■ Restoring device actions
1 1 Switch to the Learn mode via at the bottom of
the touch screen.
2 2 Complete steps 3 to 7 in “Learning device actions” on
page __.
The device item is restored.
■ Restoring components, macro groups or
timer groups
1 1 Make sure the device tab or macro tab is active.
The device or macro tab is active when the name of a compo-
nent, macro or timer is displayed.
2 2 Switch to the Add mode via at the bottom of the
touch screen.
3 3 Tap or .
The deleted components, macro groups or timer groups become
visible.
4 4 Tap the item you want to restore.
The item is restored and you return to the Use mode.
Note
• Only the macro group or timer group itself is restored, not the
macros or timers it contained. You will need to record the macros
and set the timers again in the Edit mode.