Yamaha pmn - Manual (Page 62)

E-
56
BASIC RECORDING
REC OUT/ZONE 2 allows you to record one source while viewing and/or listening to another source.
1 1 Turn on the power to this unit and all connected
components.
2 2 Select the source component you want to record
from by using REC OUT/ZONE 2.
To record the current input source that you are watching or
listening to, set REC OUT/ZONE 2 to SOURCE/REMOTE.
To record the other source than the one that you are watching
or listening to, set REC OUT/ZONE 2 to the source you want
to record.
3 3 Start playback (or select a broadcast station) on the
source component.
4 4 Start recording on the recording component.
Notes
• Do a test recording before you start an actual recording.
• It is not possible to record the sound effect created by this unit’s
DSP processing.
• When this unit is set in the standby mode, you cannot record
between other components connected to this unit.
• Operating BASS and TREBLE, BASS EXTENSION, BAL-
ANCE, VOLUME, and DSP programs do not affect the recorded
signal.
• Setting REC OUT/ZONE 2 to SOURCE/REMOTE and using
the BGV function (see page __) allows the recording of audio and
video from a different source.
• Use INPUT SELECTOR to switch the source from the one you
are watching or listening to while making recording with REC
OUT/ZONE2 set to the source component you are recording
from.
STANDBY /ON
INPUT MODE
INPUT SELECTOR
VOLUME
SPEAKERS
BASS
SILENT
PHONES
A B STEREO
PROCESSOR DIRECT BASS EXTENSION
FM/AM A/B/C/D/E
EFFECT
ON
S VIDEO VIDEO
OFF
L R PHONO
CD
TUNER
CD–R
MD/TAPE DVD SOURCE/REMOTE D–TV/LD CABLE
SAT
VCR 1
VCR 2
VCR 3/DVR
VIDEO AUX
PROGRAM 6CH INPUT PRESET /TUNING
EDIT
MEMORY
MAN'L/AUTO FM
TUNING MODE
AUTO/MAN'L MONO TREBLE
VIDEO AUX
L AUDIO OPTICAL R
PRESET /TUNING
BALANCE
REC OUT/ZONE 2
1 2
PHONO
CD
TUNER
CD–R
MD/TAPE
DVD
SOURCE/REMOTE
D–TV/LD
CABLE
SAT
VCR 1
VCR 2
VCR 3/DVR
VIDEO AUX
REC OUT/ZONE 2
Cautions
• A given input source is not output on the same REC OUT
channel. (For example, the signal input from VCR 1 IN is not
output on VCR 1 OUT.)
• S-video and composite video signals pass independently through
this unit’s video circuits. Therefore, when recording or dubbing
video signals, if your video source component is connected to
provide only an S-video (or only a composite video) signal, you
can record only an S-video (or only a composite video) signal by
your VCR.
• DIGITAL OUTPUT jacks and analog OUT (REC) jacks are
independent. Only digital signals are output from DIGITAL
OUTPUT jacks and analog signals from OUT (REC) jacks.
• A source connected to the 6CH INPUT jacks of this unit cannot
be recorded.
• The LD q RF (AC-3) input signal cannot be output using REC
OUT/ZONE 2.
• Check the copyright laws in your country to record from records,
CDs, radio, etc. Recording of copyrighted material may infringe
copyright laws.
■ Special considerations when recording DTS
software
The DTS signal is a digital bitstream. Attempting to digitally record
the DTS bitstream will result in noise being recorded. Therefore, if
you want to use this unit to record sources that have DTS signals
recorded on them, the following considerations and adjustments
need to be made. For LDs, DVDs and CDs encoded with DTS,
when your player is compatible with the DTS format, follow its
operation instruction to make a setting so that the analog signal will
be output from the player.