Z Microsystems 15 - Manual (Page 27)

Doc# 27-0002UM Issued 7/99 Rev. 1.2
POWER MANAGEMENT
NOTE: If the computer has
previously been used with a
CRT monitor and is
currently configured to a
display mode outside the
range that the Flat Panel
monitor can display,
reattach the CRT monitor
temporarily until the
computer is reconfigured,
preferably to 1024 x 768 at
60 Hz.
To benefit from power management,
the monitor must be used in conjunc-
tion with a computer that implements
the Video Electronics Standards
Association (VESA) Display Power
Management Signaling (DPMS)
Standard.
The power management feature is
invoked when the computer recog-
nizes that the mouse and keyboard
have not been used for a user-
definable period. There are several
states as described in the table
below.
It is recommended that the monitor
be switched off at the end of each
working day, or whenever it is
expected to be unused for long
periods during the day.
The following is the Power Manage-
ment Table:
27
Display Modes