Z Microsystems 15 - Manual (Page 19)

Doc# 27-0002UM Issued 7/99 Rev. 1.2
OSD Lock/Unlock
• This feature allows you to secure
the current control settings, while
allowing the user to adjust Bright-
ness and Contrast, so that they
cannot be inadvertently changed,
you can unlock the OSD controls at
any time by using the same
procedure.
• Push and hold the button 10
seconds to Lock or to Unlock.
When locked, a “LOCKED”
message will be displayed.
NOTE: The LCD monitor needs time
to become thermally stable
the first time you turn it on
each day. Thus, to achieve
more accurate adjustments
for parameters. Allow the
LCD monitor to warm up
(be On) for at least 15
minutes before making any
screen adjustments.
On-Screen Display (OSD) Controls
19
Monitor Adjustments