Z Microsystems 15 - Manual (Page 26)

Doc# 27-0002UM Issued 7/99 Rev. 1.2
The display mode the monitor uses is
controlled by the computer. Refer to
the computer documentation for
details on how to change display
modes.
The image size, position and shape
may change when the display mode
changes. This is normal and the
image can be readjusted using AUTO
SETUP and the monitor controls.
Unlike CRT monitors, which require a
high refresh rate to minimize flicker,
TFT technology is inherently flicker-
free. If possible, configure the
computer for 1024 x 768
addressablility at 60 Hz vertical
refresh rate.
For the Factor Set Display Modes listed
below, the screen image has been
optimized during manufacture.
Display Modes
FACTORY SET DISPLAY MODES
26