Yamaha X-V2600 - Manual (Page 90)

86
SYSTEM OPTIONS
Audio Delay (Audio delay)
Use to delay the sound output and synchronize it with the
video image. This may be necessary when using certain
LCD monitors or projectors.
Control range: 0 to 240 (ms)
Max Volume (Maximum volume)
Use to set the maximum volume level so that the sound
output level will not increase beyond the limited volume
level. For example, the original volume range is –30.0 dB
to –80 dB. However, if Max Volume is set to –5 dB, the
volume range becomes –5 dB to –90 dB.
Control range: –30.0dB to –80dB
Control step: 5 dB
• When a test tone is output, the Max Volume setting is
automatically deactivated because the volume level is
automatically set to 0 dB regardless of the current Max Volume
setting.
• The Max Volume setting takes priority over the Initial Volume
setting (see below). For example, if Initial Volume is set to 5 dB
and then Max Volume is set to 3 dB, the volume level is
automatically set to 3 dB when you turn on the power of this
unit next time. However, the Initial Volume setting is kept as
5 dB.
Initial Volume (Initial volume)
Use to set the volume level of the main room when the
power of this unit is turned on.
Choices: Off, –80dB to +16.5dB
Control step: 0.5 dB
The Max Volume setting (see above) takes priority over the Initial
Volume setting. Therefore, Initial Volume cannot be set beyond
the existing Max Volume setting.
PR/SB Priority (Presence/surround back speaker
priority)
Surround back and presence speakers do not output sound
simultaneously. You can select to prioritize either speaker
set when playing sources that contain surround back
channel signals using CINEMA DSP sound field
programs.
Choices: Presence, Surround Back
• Select “Presence” to use presence speakers even when
surround back channel signals are input. The signals
for the surround back channel will be output from
surround speakers.
• Select “Surround Back” to use surround back speakers
when a surround back channel signal is detected in a
CINEMA DSP sound field program. Presence channel
signals will be output from front speakers.
Notes
Muting Type
Audio Delay
Initial Volume
Max Volume
0ms
Audio Delay
Muting Type
Initial Volume
PR/SB Priority
Max Volume -30.0dB
Note
Max Volume
Audio Delay
PR/SB Priority
Initial Volume Off
Max Volume
Initial Volume
PR/SB Priority Surround Back
Presence