Video jacks, Video signal flow for monitor out – Yamaha X-V2600 User Manual
Page 26
22
CONNECTIONS
■ Video jacks
This unit has four types of video jacks (composite, component, S-video and HDMI). Connection depends on the
availability of input jacks on your monitor. When Conversion
is set to
On (see page 88), the analog video signals input at
the VIDEO, S VIDEO and COMPONENT VIDEO jacks can be output at the VIDEO, S VIDEO and COMPONENT
VIDEO jacks interchangeably. In addition, when Conversion
is set to
On (see page 88) and HDMI Up-Scaling is set to
On (see page 88), the analog video signals input at the VIDEO, S VIDEO and COMPONENT VIDEO jacks can be
digitally up-converted and output at the HDMI OUT jack.
VIDEO jacks
For conventional composite video signals.
S VIDEO jacks
For S-video signals, separated into luminance (Y) and
color (C) video signals to achieve high-quality color
reproduction.
COMPONENT VIDEO jacks
For component signals, separated into luminance (Y) and
color difference (P
B
, P
R
) to provide the best quality in
picture reproduction.
HDMI jacks
For HDMI digital video signals.
■ Video signal flow for MONITOR OUT
• The analog video signals output at the COMPONENT VIDEO jacks can be deinterlaced from 480i to 480p. Set Component I/P to On
in Manual Setup to activate this feature (see page 88).
• The analog video signals input at the COMPONENT VIDEO jacks and output at the S VIDEO or VIDEO jacks cannot be converted to
480p/1080i/720p.
• The analog video signals output at the HDMI jack can be up-scaled to 480p/1080i/720p.
• When the analog video signals are input at the COMPONENT VIDEO, S VIDEO and VIDEO jacks, the priority order of the input
signals is as follows where the analog video signals input at the COMPONENT VIDEO jacks have the top priority.
1. COMPONENT VIDEO
2. S VIDEO
3. VIDEO
VIDEO
S VIDEO
COMPONENT VIDEO
Y
P
B
P
R
HDMI
Notes
S VIDEO
VIDEO
COMPONENT
VIDEO
HDMI
Through
Output
(MONITOR OUT)
Input
Component I/P (see page 88) only when Conversion is set to On (see page 88)
HDMI Up-Scaling (see page 88) only when Conversion is set to On (see page 88)
Digital video
Analog video