Yamaha X-V2600 - Manual (Page 123)

HDMI
119
AD
V
A
N
C
ED
OPERA
T
ION
HDMI (High-Definition Multimedia Interface) is the first
industry-supported, uncompressed, all-digital A/V (audio/
video) interface.
Providing an interface between any A/V source (such as a
set-top box or A/V receiver) and an audio/video monitor
(such as a digital television – DTV), HDMI supports
standard, enhanced or high-definition video as well as
multi-channel digital audio using a single cable.
HDMI transmits all ATSC HDTV standards and supports
8-channel digital audio, with bandwidth to spare to
accommodate future enhancements and requirements.
When used in combination with HDCP (High-bandwidth
Digital Content Protection), HDMI provides a secure
audio/video interface that meets the security requirements
of content providers and system operators.
For further information on HDMI, visit the HDMI website
at “http://www.hdmi.org/”.
• Analog audio signals input at the audio input jacks other than
the HDMI IN 1 or HDMI IN 2 jack cannot be output at the
HDMI OUT jack. However, analog video signals input at the
composite video, S-video and component video jacks can be
up-converted to HDMI so that the digitally up-converted video
signals can be output at the HDMI OUT jack (see page 88).
• Connect the HDMI OUT jack of other components (such as a
DVD player) to the HDMI IN 1 or HDMI IN 2 jack of this unit.
Connect the HDMI OUT jack of this unit to the HDMI IN 1 or
HDMI IN 2 jack of other components (such as a projector).
• You need a commercially available HDMI cable to connect this
unit to other HDMI components. Use an HDMI cable shorter
than 5 m (15 ft) to ensure stable operations and to prevent losses
of video quality.
• This unit is not compatible with HDCP-incompatible HDMI or
DVI components.
• Use a conversion cable (HDMI jack
↔
DVI-D jack) to connect
this unit to other DVI components.
• Digital video signals input at the HDMI IN 1 or HDMI IN 2
jack cannot be output from analog video output jacks.
• Audio signals input at input jacks other than the HDMI IN 1 or
HDMI IN 2 of this unit cannot be digitally output at the
HDMI OUT jack.
• This unit is not compatible with multi-stereo area audio signals
of Super Audio CDs. You can connect devices (such as a DVD
player) to the MULTI CH INPUT jacks.
• When connected to a DVD player, audio signals may not be
output depending on the type of the DVD player. In case the
DVD player connected to this unit does not output DVD multi-
channel audio signals at the HDMI OUT jack, connect the DVD
player to the analog multi-channel audio input jacks.
• When CPPM copy-protected DVD audio plays back, video and
audio signals may not be output depending on the type of the
DVD player.
• Video and audio signals input at the HDMI IN 1 or HDMI IN 2
jack cannot be output at the HDMI OUT jack when this unit is
set to the standby mode or the power is turned off.
• When connecting other HDMI components to this unit, refer to
the instruction manuals for those components.
• When HDMI audio signals are output from components like a
DVD player, the audio signal format (such as sampling
frequencies) may be restricted depending on the HDMI video
signal format.
• Do not disconnect or connect the HDMI cable from this unit or
turn off the power of the HDMI/DVI components connected to
the HDMI OUT jack of this unit while data is being transferred.
Doing so may disrupt playback or cause noise.
• Some video monitors connected to this unit via a DVI
connection fail to recognize the HDMI audio signals being
input if they are in the standby mode. In this case, the HDMI
indicator flashes irregularly and HDCP ERROR appears in the
front panel display as if the DVI monitors do not support the
HDCP copy protection standards.
■ HDMI compatibility with this unit
HDMI
What is HDMI?
This unit’s HDMI interface is based on the following
standards:
• HDMI 1.1 (High-Definition Multimedia Interface
Specification Version 1.1) licensed by HDMI
Licensing, LLC.
• HDCP 1.1 (High-bandwidth Digital Content
Protection System Revision 1.1) licensed by Digital
Content Protection, LLC.
Notes
Audio signal
types
Audio signal
formats
Compatible
HDMI
components
2ch Linear
PCM
2ch, 32-192 kHz,
16/20/24 bit
CD, DVD-Video,
DVD-Audio, etc.
Multi-ch
Linear PCM
5.1 ch, 32-96 kHz,
16/20/24 bit
DVD-Audio, etc.
Bitstream Dolby Digital,
DTS
DVD-Video, etc.