Yamaha X-V2600 User Manual

Page 11

CONTROLS AND FUNCTIONS

INTR

ODUCTION

8 Front panel display
Shows information about the operational status of this
unit.

9 PRESET/TUNING (EDIT)
Switches the function of PRESET/TUNING/CH l / h
between selecting preset station numbers and tuning when
TUNER is selected as the input source (see pages 47 to
52).

0 FM/AM
Switches the reception band (FM or AM) when TUNER is
selected as the input source (see page 47).

The frequency of the previously received station is automatically
recalled.

A MEMORY (MAN’L/AUTO FM)
Stores a station in the memory when TUNER is selected
as the input source. Hold down for more than 3 seconds to
start automatic preset tuning (see page 48).

B TUNING MODE (AUTO/MAN’L), DISPLAY
Switches the tuning mode between automatic (the AUTO
indicator is turned on) and manual (the AUTO indicator is
turned off) when TUNER is selected as the input source.

C STRAIGHT (EFFECT)
Turns the sound field programs on or off. When
STRAIGHT is selected, 2-channel or multi-channel input
signals are output directly from the respective speakers
without effect processing.

D Remote control sensor
Receives infrared signals from the remote control.

E TONE CONTROL
Use to adjust the balance of bass and treble for the front
left and right and center channels (see page 39).

F PURE DIRECT
Turns on or off the PURE DIRECT mode (see page 42).

The indicator around the button lights up when the unit is in the
PURE DIRECT mode.

G REC OUT/ZONE 2
Selects the input source you want to direct to the audio/
video recorder and Zone 2 outputs independently of the
input source you are listening to or watching in the main
room. When set to the SOURCE/REMOTE position, the
input source is directed to all outputs.

The Zone 2 output is always identical with the input source you
record.

H OPTIMIZER MIC jack
Use to connect the supplied optimizer microphone to run
AUTO SETUP (see page 32).

I SPEAKERS A/B
Turn on or off the set of front speakers connected to the
SPEAKERS A and/or B terminals on the rear panel each
time the corresponding button is pressed.

PHONES (SILENT CINEMA) jack

Outputs audio signals for private listening with
headphones.

• When you connect headphones, no signals are output at the

PRE OUT jacks or to the speakers.

• All Dolby Digital and DTS audio signals are mixed down to 2-

channel stereo (front left and right channels).

K VIDEO AUX jacks
Input audio and video signals from an external source such
as a game console. To reproduce source signals at these
jacks, select V-AUX as the input source.

L MULTI ZONE buttons

ZONE 2 ON/OFF
Turns on Zone 2 only or sets it to the standby mode.
See page 30 for details.

This button is operational only when MASTER ON/OFF is
pressed inward to the ON position.

ZONE 3 ON/OFF
Turns on Zone 3 only or sets it to the standby mode.
See page 30 for details.

This button is operational only when MASTER ON/OFF is
pressed inward to the ON position.

ZONE CONTROL
Switches the zone you want to control between the
main unit, Zone 2 and Zone 3 (see page 117).
After you press ZONE CONTROL, the indicator for
the currently selected zone flashes in the front panel
display for approximately 5 seconds. While the
indicator is flashing, perform the desired operation.

M PROGRAM selector
Use to select sound field programs or adjust the balance of
bass and treble in conjunction with TONE CONTROL.

N VOLUME
Controls the volume level of all audio channels.

This does not affect the OUT (REC) level.

Note

Notes

Note