Yamaha X-V2600 User Manual
Page 101
97
SYSTEM OPTIONS
AD
V
A
N
C
ED
OPERA
T
ION
Zone2 Volume (Zone 2 volume)
Use to select how the volume control will operate with
regard to the ZONE 2 OUTPUT jacks. When Zone2
Amplifier is set to “Internal”, this feature is automatically
set to “Variable”.
Choices: Fixed, Variable
• Select “Fixed” to fix the ZONE 2 OUTPUT volume
level to a standard line level.
• Select “Variable” to adjust the ZONE 2 OUTPUT
volume simultaneously using VOL +/– on the remote
control.
Zone3 Volume (Zone 3 volume)
Use to select how the volume control will operate with
regard to the ZONE 3 OUTPUT jacks.
Choices: Fixed, Variable
• Select “Fixed” to fix the ZONE 3 OUTPUT volume
level to a standard line level.
• Select “Variable” to adjust the ZONE 3 OUTPUT
volume simultaneously using VOL +/– on the remote
control.
Zone2 OSD (Zone 2 on-screen display)
Use this feature to display the operational status of Zone 2
as well as Zone 3 on the Zone 2 video monitor connected
to the ZONE 2 VIDEO jacks on the rear panel of this unit.
The Zone 2 and Zone 3 information to be displayed is
listed as follows:
• The input source of Zone 2 and Zone 3
• The volume level of Zone 2 and Zone 3
• The audio mute status of Zone 2 and Zone 3
• The tonal quality status of Zone 2 and Zone 3
• The XM Satellite Radio information when XM is
selected as the input source of Zone 2 and Zone 3
Choices: Off, Zone2, Zone2&Zone3
• Select “Off” not to display any operational status of
Zone 2 and Zone 3 on the Zone 2 video monitor.
• Select “Zone2” to display the operational status of
Zone 2 only on the Zone 2 video monitor.
• Select “Zone2&Zone3” to display the operational
status of Zone 2 and Zone 3 on the Zone 2 video
monitor.
• If Zone2 OSD is set to Zone2&Zone3, changes to the
operational status of Zone 3 is displayed on the Zone 2 video
monitor. For example, if the input source of Zone 3 is changed
while you are watching TV in Zone 2, the name of the changed
input source of Zone 3 is displayed on your TV in Zone 2.
• If Zone2 OSD is set to Zone2&Zone3, the display contents of
Zone 2 and Zone 3 depends on whether or not Zone 2 and Zone
3 are turned on with ZONE 2 ON/OFF and ZONE 3 ON/OFF
on the front panel (see page 116).
– If both Zone 2 and Zone 3 are turned on, the video signals of
the current input source of Zone 2 and the corresponding OSD
are displayed on the Zone 2 video monitor.
– If Zone 2 is turned off and Zone 3 is turned on, only the
corresponding OSD is displayed in the gray background
regardless of the REC OUT/ZONE 2 status on the front panel.
– If Zone 2 is turned on and Zone 3 is turned off, the video
signals of the current input source of Zone 2 and the
corresponding OSD are displayed on the Zone 2 video
monitor.
– If both Zone 2 and Zone 3 are turned off, no video signals and
no OSD are displayed on the Zone 2 video monitor.
Zone2 Amplifier
Zone3 Amplifier
Zone3 Volume
Zone2 OSD
Zone2 Volume
Variable
Fixed
Zone3 Amplifier
Zone2 Volume
Zone2 OSD
Zone3 Volume
Variable
Fixed
Notes
Zone2 Volume
Zone3 Volume
Zone2 OSD
Off
Zone2
Zone2&Zone3