beautypg.com

General information, Highlighted information, Glossary – Walker MC (20 HP) User Manual

Page 5: Identifying number locations

background image

General Information

1

HIGHLIGHTED INFORMATION

Walker Manufacturing recommends that any service

requiring special training or tools be performed by

an authorized Walker Mower Dealer. There are sev-

eral general practices to be aware of in the area of

safety. Most accidents associated with the opera-

tion or maintenance of a Walker Mower are caused

by disregarding basic safety precautions or specific

warnings. Such accidents, in most cases, can be

prevented by being aware of the dangers present.

Information of special importance has been high-

lighted in bold type in this manual. Refer to Safety

Instructions for the meanings of DANGER, WARN-

ING, CAUTION, IMPORTANT, and NOTE.

GLOSSARY

There are many terms that are either unique to this

equipment or that are used as acronyms. The

following terms and their definitions will help while

using this manual:

·

DECK is the mowing attachment mounted on

the front of the tractor which includes the carrier

frame, deck housing, blade drive gearboxes,

and cutter blades.

·

FORWARD SPEED CONTROL (FSC) controls

the maximum forward speed of the tractor;

functioning as a cruise control.

·

GRASS HANDLING SYSTEM (GHS

®

) collects

mowed material and deposits it in the catcher.

·

GRASS-PAK

®

SWITCH is mounted on the

grass delivery spout (in the catcher) and acti-

vates the “full” signal horn when the grass

catcher is full.

·

GROUND DRIVE refers to the dual hydrostatic

transmissions which drive the main wheels.

·

HYDROSTATIC TRANSMISSION transmits

and controls power from the ground drive belt to

the main drive wheel.

·

LEFT HAND (LH) refers to the left-hand side of

the tractor when the operator is seated facing

forward in the tractor seat.

·

POWER TAKE-OFF (PTO) transmits engine

power to run the cutter blades and GHS blower.

·

POWERFIL

®

spreads the mowed material

throughout the interior of the grass catcher by

an oscillating delivery spout.

·

RIGHT HAND (RH) refers to the right-hand side

of the tractor when the operator is seated facing

forward in the tractor seat.

·

SIDE DISCHARGE (SD) mows but does not

collect the mowed material.

·

STEERING LEVERS steer the tractor by con-

trolling the dual hydrostatic transmissions.

·

TRACTOR is the prime mover, including the en-

gine, drive train, operator seat, and controls to

operate the mower.

·

TRANSMISSION LOCKOUT releases the hy-

drostatic transmissions to permit freewheeling

the tractor.

IDENTIFYING NUMBER LOCATIONS

The tractor serial number plate is affixed to the trac-

tor body just below the left rear corner of the seat.

The mower deck serial number plate is affixed

alongside the angle iron framing on the LH side of

the LH mower blade drive. Model and serial num-

bers are helpful when obtaining replacement parts

and maintenance assistance. For ready reference,

please record these numbers in the space provided.

Fill In By Purchaser

Tractor Model No. ______________________

Tractor Serial No. ______________________

Deck Serial No. ______________________

Engine Model No. ______________________

Engine Serial No. ______________________

Date of Purchase ______________________