White Rodgers 1F95W-80 - Manual (Page 27)

27
Enter Cooling Program
If outside temperature is below 50
°
F, we
recommend that you remove the thermo-
stat from the wall before proceeding with
the following steps to program cooling
temperatures. Personal injury or prop-
erty damage may occur due to air condi-
tioner compressor slugging. A fresh 9
volt Energizer
® alkaline battery must be
installed to perform off-wall program-
ming. Programming away from the wall
should prevent accidental compressor
operation. USE SYSTEM
HEAT - OFF - COOL - AUTO
TO TURN SYS-
TEM OFF BEFORE REATTACHING THE
THERMOSTAT TO THE SUBBASE!
1. Press SYSTEM
HEAT - OFF - COOL - AUTO
until COOL is displayed.
2. Press VIEW
PRGM
once. MO, the abbreviation for
Monday, and the letter O, representing the
occupied cooling period, will appear in the
display. Also displayed are the currently
programmed start time for the occupied
cooling period and the currently programmed
COOL O temperature.
3. To change the displayed start time to your
selected start time for Monday’s occupied
cooling period, press TIME
FWD or TIME
BACK
until your
selected time is displayed. The time will
change in 15 minute increments.
4. If the temperature displayed is not the COOL
O temperature you want for Monday’s occu-
pied cooling period, press
or (if
CAUTION !