White Rodgers 1F95W-80 - Manual (Page 22)

22
Set Current Time and Day
1. Press SET
CLOCK
once. The display will show
minutes only.
EXAMPLE:
2. Press and hold either TIME
FWD or TIME
BACK
until you
reach the correct minutes.
3. Press SET
CLOCK
once. The display window will
show the hour only.
EXAMPLE:
4. Press and hold either TIME
FWD or TIME
BACK
until you
reach the correct hour and AM/PM designa-
tion (AM begins at midnight; PM begins at
noon).
ENTERING YOUR PROGRAM
Follow these steps to enter the heating/cooling
program you have selected.
We recommend that you remove the thermostat
from the wall for programming (especially for
entering cooling programming). A fresh 9 volt
Energizer
® alkaline battery must be installed to
perform off-wall programming. USE SYSTEM
HEAT - OFF - COOL - AUTO
TO
TURN THERMOSTAT OFF BEFORE REAT-
TACHING THERMOSTAT TO SUBBASE!
You cannot program the thermostat with the
SYSTEM SWITCH in the AUTO position.
NOTE