White Rodgers 1F95W-80 - Manual (Page 15)

15
• ADJUSTABLE HEATING AND COOLING
CYCLE TIMES (ANTICIPATION) — If the
heating/cooling system is turning on and off
too often (short cycles) or not often enough
(long cycles), you may want to adjust the
anticipation setting.
A cooling anticipation setting of less
than 10 may cause decreased compres-
sor life.
To adjust anticipation, press SET
CLOCK
and ADV
DAY
at the same time. The display will show
HEAT 5 (this is the factory preprogrammed
heating anticipation setting). You may se-
lect any anticipation setting from 4 to 40. If
the heat cycles are too short, press TIME
FWD to
• HOLD TEMPERATURE — The thermostat
can hold any temperature within its range
for an indefinite period, without reverting to
the program. Press HOLD
COPY
. HOLD will be
displayed. Then choose the desired hold
temperature by pressing
or . The
thermostat will hold the room temperature
at the selected setting until you press RUN
PRGM
to start program operation again. This fea-
ture is ideal for energy conservation when
the building is unoccupied for an extended
period of time.
•
°
F/
°
C CONVERTIBILITY — Press TIME
FWD
and TIME
BACK
at the same time until the tem-
perature display is in
°
C (Celsius). To dis-
play
°
F, repeat the process.
CAUTION !