White Rodgers 1F95W-80 - Manual (Page 25)

25
EXAMPLE:
This display window shows that for Monday’s
occupied heating period, the start time is
8:00 AM, 70
°
is the programmed tempera-
ture, and the fan is set to PRG FAN (continu-
ous fan operation); this example reflects
factory preprogramming, where 70
°
is the
HEAT O temperature.
3. To change the displayed start time to your
selected start time for Monday’s occupied
heating period, press TIME
FWD or TIME
BACK
until
your selected time is displayed. The time
will change in 15 minute increments.
4. If the temperature displayed is not the HEAT
O temperature you want for Monday’s occu-
pied heating period, press
or (if
you continue to press or , the
NOTE
display will alternate between the HEAT O
and HEAT U temperatures you previously
selected).
Damper operation is linked to the occupied or
unoccupied temperature selections, not to the
occupied or unoccupied time periods. The
damper will be open only during periods with
occupied temperatures. Therefore, we suggest
that you program occupied temperatures during
occupied periods and unoccupied temperatures
during unoccupied periods.
5. If you want the fan to run continuously
during Monday’s occupied heating period,
press FAN
ON - AUTO
until PRG FAN is displayed.
6. After selecting the desired heating tempera-
ture for Monday’s occupied heating period,