Warning – Wayne-Dalton 341785 User Manual

Page 5

Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer.

To find your Wayne-Dalton dealer; refer to your local yellow pages / business listings or go to Find a dealer area online at

www.wayne-dalton.com

PRE-INST

ALLA

TION

Tools Required

POWER DRIll

RaTChET WRENCh

PhIllIPs hEaD sCREWDRIVER

PENCIl

1/8”, 3/16” DRIll bITs

FlaT TIP sCREWDRIVER

7/16” sOCkET DRIVER

TaPE MEasuRE

sTEP laDDER

7/16”, 1/2”, 9/16”

sOCkETs

7/16”, 1/2”, 3/8”, 9/16”

WRENChEs

saFETy GlassEs

VICE GRIPs

VICE ClaMPs

haMMER

saW hORsEs (PaIR)

GlOVEs

aPPROVED WINDING

baRs

lEVEl

1/4” TORx bIT

IF yOuR COuNTERbalaNCE sysTEM Is OThER ThaN ThOsE MENTIONED IN sECTIONs P1, P2 aND P3, DO NOT

aTTEMPT TO WORk ON IT, buT haVE a qualIFIED DOOR aGENCy PERFORM ThE WORk. OThERWIsE, sEVERE OR

FaTal INjuRy COulD REsulT.

DIsCONNECT aND REMOVE aNy ElECTRIC OPENER PRIOR TO REMOVal OF COuNTERbalaNCE sysTEMs TO

PREVENT uNINTENDED DOOR OPERaTION. OThERWIsE, sEVERE OR FaTal INjuRy COulD REsulT.

COuNTERbalaNCE sPRING TENsION MusT bE RElIEVED bEFORE REMOVING aNy haRDWaRE. a POWERFul

sPRING RElEasING IT’s ENERGy suDDENly CaN CausE sEVERE OR FaTal INjuRy.

IF yOu haVE baCk PROblEMs DO NOT aTTEMPT ThIs, OR sEVERE INjuRy COulD REsulT

REMOVING aN ExIsTING DOOR CaN bE DaNGEROus. FOllOW INsTRuCTIONs ON PaGEs 6-10 “REMOVING aN OlD

DOOR/PREPaRING ThE OPENING” CaREFully, OThERWIsE, sEVERE OR FaTal INjuRy COulD REsulT.

If you have an existing door, follow the instructions to identify which counterbalance removal is necessary. The process of removing

an existing door begins by identifying it’s counterbalance system. If you are not removing an existing door, proceed to PREPaRING ThE

OPENING on page 10. Generally, you will find three (3) types of counterbalance systems: Torsion spring counterbalance systems, Wayne-

Dalton

exclusive TorqueMaster

and Extension spring counterbalance systems.

For more technical information regarding the opening preparation, installation and use of your garage door and opener, you can go to

www.dasma.com and click on Publications and then Technical Data sheets Number 156, 161 and 164.

Removing An Old Door

WARNING