Warning – Wayne-Dalton TORQUEMASTER 3663-372 User Manual

Page 31

Please Do Not Return This Product To The Store. Call Us Directly! Our Trained Technicians Will Answer Your Questions and/or Ship Any Parts You May Need.

You can reach us Toll Free at 1-888-827-3667 for Consumer Assistance or online at www.wayne-dalton.com

PRE-OPERA

TION

Light Fixture

Diffuser

75W (MAX)

Light Bulb

(Not Included)

Power Outlet

Snap Tabs

Mating Slots

Screw a 75W (maximum) light bulb into
light socket and snap diffuser into light
fixture.

When assembling diffuser, make sure all
three snap tabs are aligned and fully
snapped into the three mating slots of the
light fixture.

Turn receptacle power back on at fuse/
breaker box. The light should blink one
time when the power is turned back on.

NOTE: An accessory power outlet
receptacle (600 Watt Maximum) is
provided as part of the light fixture.

Attaching Diffuser

TO REDUCE THE RISK OF ELECTRICAL
SHOCK, DO NOT CHANGE THE POWER
CORD PLUG IN ANYWAY.

The opener can be permanently wired. To
permanently wire the unit, see Permanent
Wiring option on page 39.

Plug the end of the power cord into the
closest grounding type receptacle
Otherwise, contact a service person for
further options. Excess power cord length
must be routed and contained safely away
from any moving parts.

As soon as power is applied to the opener,
it should beep two times.

NOTE:

Do not permanently attach power

cord to building!

NOTE:

Use only the flexible cable clips

supplied with the opener.

Connecting Opener

Power Cord

Plug Into Nearest

Power Outlet

Cable Clips

#6 x 7/8

Wood Screws

No Interference

Between Power

Cord and

Disconnect Cable

(Ceiling)

Light Socket

WARNING

Disconnect

Cable

Power Cord

Tools Needed:

Step Ladder

Tools Needed:

Phillips Head

Screwdriver

Step Ladder