Wayne-Dalton TORQUEMASTER 3663-372 - Manual (Page 39)

32 Please Do Not Return This Product To The Store. Call Us Directly! Our Trained Technicians Will Answer Your Questions and/or Ship Any Parts You May Need.
You can reach us Toll Free at 1-888-827-3667 for Consumer Assistance or online at www.wayne-dalton.com
Tools Needed:
6” Height Object WHEN PERFORMING THIS PART OF THE
TEST, DO NOT PLACE YOURSELF UNDER
DESCENDING DOOR, OR SEVERE OR
FATAL INJURY MAY RESULT.
Starting with the door fully open, place
a 6” high object on the floor, in line with
sensors, one foot from the left side of
the door.
Activation of the opener with the wall
station Up/Down button should cause the
door to move no more than one foot, stop
and then reverse to fully open position.
Repeat this test with the 6” high object
placed at the center of the door and then
one foot from the right side of the door.
The 6” high object, when placed on the
floor in line with sensors, while door is
closing, should also cause the door to
reverse.
Testing the Safety Sensors
(If Installed)
12”
6”
12”
IF OPENER DOES NOT RESPOND PROPERLY TO THESE TESTS (STEPS
28 AND 29), DO NOT USE DOOR UNTIL A QUALIFIED SERVICE PERSON
HAS MADE NECESSARY ADJUSTMENTS/REPAIRS, OR SEVERE OR FATAL
INJURY COULD RESULT FROM OPERATING THE DOOR/OPENER.
WARNING
WARNING
29
PRE-OPERA
TION