Warning – Wayne-Dalton TORQUEMASTER 3663-372 User Manual
Page 30
23
Please Do Not Return This Product To The Store. Call Us Directly! Our Trained Technicians Will Answer Your Questions and/or Ship Any Parts You May Need.
You can reach us Toll Free at 1-888-827-3667 for Consumer Assistance or online at www.wayne-dalton.com
Receptacle Cover
#6-32 x 3/4”
Phillips Pan Head
Screw
Hole Plug
Remove Screw
Installing the Light Fixture
TO AVOID ELECTRICAL SHOCK
DISCONNECT POWER TO THE
RECEPTACLE AT THE FUSE/BREAKER
BOX, BEFORE PROCEEDING WITH THE
INSTALLATION OF THE LIGHT FIXTURE.
IMPORTANT!
THIS LIGHT FIXTURE HAS A
GROUNDING TYPE PLUG WITH A THIRD
(GROUNDING) PIN. THIS PLUG WILL ONLY
FIT INTO A GROUNDING-TYPE OUTLET. IF
THE PLUG DOES NOT FIT INTO YOUR
OUTLET, CONTACT A QUALIFIED
ELECTRICIAN TO INSTALL THE PROPER
GROUNDING TYPE OUTLET. DO NOT ALTER
THE PLUG IN ANY WAY.
TO AVOID ELECTRICAL SHOCK/FIRE, DO
NOT MOUNT THE LIGHT FIXTURE TO A
RECEPTACLE WITH A METAL FACE
PLATE.
IMPORTANT!
GARAGE DOOR MUST
CLEAR LIGHT FIXTURE WHEN THE DOOR IS
IN THE OPEN POSITION.
The light fixture is designed to mount
directly to a standard 120V duplex
receptacle.
Remove the screw in the receptacle
cover. Holding receptacle cover in place,
insert light fixture into the receptacle that
has the ground hole farthest from screw
hole.
Secure light fixture to receptacle with a
#6-32 x 3/4” phillips pan head screw.
Install hole plug into the screw hole in the
light fixture.
NOTE: For temperature protection, the
hole plug must be in place prior to using
the light fixture.
WARNING
WARNING
16
Tools Needed:
Phillips Head
Screwdriver
Flat Tip
Screwdriver
Step Ladder